Guardian Portable Eyewash & Drench Hose Unit W/ Dolly Heated 15 Gal
APPLICATION ANSI Z358.1-2014 ""EMERGENCY EYEWASH AND SHOWER EQUIPMENT"" REQUIRES THAT THE WATER DELIVERED BY AN EMERGENCY EYEWASH BE ""TEPID"" WHICH IS DEFINED AS BETWEEN 60° AND 100° F (15.5°- 37.8° C). THE G1562HTR-DOL PORTABLE EYEWASH/DRENCH HOSE UNIT IS ELECTRICALLY HEATED AND INSULATED MAKING IT IDEAL FOR USE IN AREAS WHERE AMBIENT TEMPERATURES MAY DROP BELOW THE TEPID RANGE. IN EXTREME CONDITIONS THE HEATING SYSTEM WILL ALSO PROTECT THE UNIT AGAINST FREEZING. THE G1562HTR-DOL HEATED PORTABLE EYEWASH/DRENCH HOSE UNIT USES AIR PRESSURE TO DELIVER 10 GALLONS (37.5L) OF WATER FOR 15 MINUTES. FOR USE IN LOW HAZARD AREAS WHERE A CONTINUOUS SUPPLY OF WATER IS NOT AVAILABLE. INSTALLATION UNIT CAN BE PLACED IN ANY AREA WHERE HAZARDS ARE PRESENT. TO PREPARE UNIT FOR USE FILL WITH 10 GALLONS (37.5L) OF CLEAN POTABLE WATER AND ADD BACTERIOSTATIC ADDITIVE (SUPPLIED WITH UNIT). BACTERIOSTATIC ADDITIVE PROTECTS AGAINST GROWTH OF BACTERIA FUNGUS ALGAE AND ACANTHAMOEBA. AFTER FILLING PRESSURIZE WITH 80 PSI (5.5 BAR) AIR PRESSURE. DOLLY UNIT IS MOUNTED ON DOLLY FOR EASE OF INSTALLATION AND MOVEMENT. DOLLY HAS STAINLESS STEEL PLATFORM WITH (4) POLYURETHANE NON-MARKING LOCKABLE WHEELS. HEATING SYSTEM SILICONE DRUM HEATER IS ATTACHED TO OUTSIDE OF TANK. THERMOSTAT SET TO 65° F (18.3° C) SENSES THE TEMPERATURE OF THE WATER INSIDE THE TANK TO TURN THE HEATER ON AND OFF. HEATER REQUIRES 15 AMP 120 VOLT POWER SUPPLY. TOTAL AMP DRAW IS 3.33 AMPS. FURNISHED WITH 9' CORD WITH GROUND FAULT CIRCUIT INTERRUPTER (GFCI) PLUG AND MANUAL RESET. EXTERIOR JACKET HIGH VISIBILITY ORANGE INSULATED NYLON JACKET CONTAINS HEAT TO MAINTAIN WATER TEMPERATURE AND PROTECTS UNIT AGAINST FREEZING. JACKET IS WATERPROOF AND RESISTANT TO MILDEW. TANK 15 GALLON (56L) STAINLESS STEEL TANK. TANK HAS BUILT-IN CARRYING HANDLES AIR INTAKE VALVE PRESSURE GAUGE AND PRESSURE RELIEF VALVE. EYEWASH USE TO WASH USER'S EYES FOR 15 MINUTES. FURNISHED WITH (2) GS-PLUS LOW FLOW
Priced: Each
Minimum for Order: 1
Manufacturer Dropship Typical Leadtime: 10.0
